Nortel Networks Enterprise Edge Feature Programming Telephone - Manual (Page 89)

P0908510 Issue 01 Enterprise Edge Feature Programming Telephone Guide
Customizing your telephone
Finding out what a button does using Button Inquiry
ƒ•‚
You can check the function of any line, intercom, or programmed button on your
Enterprise Edge telephone by pressing
ƒ•‚
. On the M7100 telephone
Button Inquiry shows your internal number followed by the function assigned to
your single memory button.
Displays
Making the display darker or lighter using Contrast adjustment
ƒ•‡
1. Press
ƒ•‡
.
2. Press a number on the dial pad to choose the contrast level you prefer.
3. Press
˙
to save your setting.
On a two-line telephone, you can use the UP and DOWN display buttons to adjust the
contrast. The number of contrast levels available varies from one telephone model
to another.
The display shows the number and name of the line.
Press
SHOW to view the redirection status of the line.
Press £ or press VIEW‚ or ·VIEW t o view a number
that is too long to fit on the display. Press ˙
or OK when you are done.
The display shows the directory number of the
telephone, and the assigned name. Press
NEXT to see
the first line assigned to ring at the intercom button.
The name of the feature assigned to a button is
displayed when you press the button. Press
£ or
SHOW for additional information.
Press the button you want to check. Press ƒ
or EXIT when you are finished.
For other displays, see Common feature displays on page 149.
11
061
SHOW OK
123456789012345...
VIEW‚ OK
221
NEXT VIEW‚
SHOW OK
Press a button
EXIT