Nortel Networks Enterprise Edge Feature Programming Telephone - Manual (Page 27)

Frequent programming operations 27
P0908510 Issue 01 Enterprise Edge Feature Programming Telephone Guide
5. Choose a Fwd on busy to setting: enter an internal or external number, or a
destination code.
Making Changes to Do Not Disturb on Busy
When you are on a call and a second call comes in,
your telephone rings softly to alert you to the second
call. You can turn this feature on or off for each
telephone.
1. Select Terminals & Sets.
2. Select a DN number.
3. Double-click Capabilities.
4. Choose a DND on Busy setting: Y (Yes) or N (No).
Tip
If the Enterprise Edge set is a member of a Hunt Group, the Call Forward on
busy feature is overridden and the Hunt Group call continues to ring until the
hunt time has expired. For more information on Hunt Groups see
Programming
Hunt Groups on page 101.
Tip
If the Enterprise Edge set is a member of a Hunt Group and the set activates
this feature, the set does not receive notification of incoming Hunt Group calls
while on a call. The DND on busy feature overrides the Hunt Group. For more
information on Hunt Groups see
Programming Hunt Groups on page 101.
Terminals & Sets
Call Forward
Capabilities
DND on Busy