Nortel Networks Enterprise Edge Feature Programming Telephone - Manual (Page 138)

138 Companion Features
Enterprise Edge Feature Programming Telephone Guide P0908510 Issue 01
3. Click the Configuration menu and select Re-eval now or Schedule.
Radios
Radio programming settings apply to Base Stations.
Cell assignment
A cell is the area covered by one or more radios in close proximity. As you move
around your office while on a call with your portable, the call is handed off from
one cell to another. A call on a portable can be handed off from one cell to another
only if those cells are programmed as neighbors. The Enterprise Edge system
automatically assigns cell neighbors and re-evaluates the cell-to-cell configuration
when Base Stations are added or removed.
The cell assignment setting allows you to see if a Base Station radio is assigned or
unassigned to a cell in the Enterprise Edge system.
To view the cell assignment:
1. Select Telephony, Companion, Radio Data, Radios.
2. Double-click Radio nnnn.
where nnnn is the four-digit radio number.
Cells
Cell programming allows you to examine the cell radio, cell neighbor, and cell radio
neighbor configurations. Select Telephony, Companion, Radio Data, Cells and
enter the cell number (01 to 32).
Cell radios
This subheading allows you to view the 5-digit number of any radios assigned to
this cell. For example, if radio 07012 is in the cell, the display shows
07012 asgned .
Select Telephony, Companion, Radio Data, Cells, Cell radios and enter the 5-
digit radio number to view the setting: Assigned or Unassigned.
Cell neighbors
This subheading allows you to view the 2-digit number of any cells that border a
particular cell in a system. Select Telephony, Companion, Radio Data, Cells, Cell
neighbors and enter the cell number to see the settings: Assigned or Unassigned.
For example cell 01, the display shows Nghbr:03 and Nghbr:04 . This means that cells
03 and 04 have been assigned as cell neighbors.
Cell rad neighbors
This subheading allows you to view the 2-digit number of any cells that border a
particular cell in a system (the cell neighbors) plus any cells that border the cell
neighbors. Select Telephony, Companion, Radio Data, Cells, Cell rad neighbors
and enter the cell number to see the settings: Assigned or Unassigned.