Nortel Networks CTA 500dm - Manual (Page 7)

P0873832 Issue 05 CTA 500 dm On Line Guide
Installation and setup
You can place the CTA 500 dm on the desk or mount it on the wall.
Refer to ÒWall mounting the CTA 500dmÓ on page 8 of this
document for the procedure.
The CTA 500 dm has four jacks that are used to connect a Norstar
telephone, an ICS, a computer, and the power supply.
¥ connect a Meridian Norstar telephone to the Terminal jack (use
the telephone cable included with the Norstar set)
¥ connect the ICS wall plug to the Line jack (use the included
6-way modular socket). Depending on the ICS software release,
restrictions may apply on the maximum number of ports and the
physical ports to which the CTA 500
dm can be connected. Refer
to the wiring information in ICS Installation Guide for more
information.
¥ connect the DB-25 connector to the serial port on the PC (use the
included RS-232 cable)
¥ connect the supplied 9 V dc, 0.6 A power adapter to the dc port
(plug the other end of the adapter into a standard three-prong ac
outlet)
Tele-
phone
KSU
Port DB-25 9 V dc
Power
LED