Nortel Networks CTA 500dm - Manual (Page 35)

AT commands 35
P0873832 Issue 05 CTA 500 dm On Line Guide
Result Codes
OK Appears following successful completion of Þle transfer and
Flash programming.
ERROR Appears when the programming failed, and the original
Flash contents remain unchanged.
Escape Sequence
The escape sequence
pause, escape character, escape character, escape character, pause
commands a transition from the On-line Data State to the On-line
Command State.
The pause before the assertion of the three escape characters is
called the guard time. This value is set in S-register 12 and has a
default of 1 second. The escape character is set in S-register 2 and
has a default of 43 (the ASCII + character).
Result Code
OK Appears when the CTA 500dm has entered the On-line
Command State.
General
General commands summary
Command Description Value
In request identification 0 product ID (default)
1 boot software revision
2 download software version
3 unique identifier
4 capability string
6 CTI MUX mode query
9 PnP identification string
&Vn view stored parameters 0 all profiles (default)
1 stored dial strings
4 stored Caller ID Security list