Nuvo Stereo System - Manual (Page 58)

50
HOLD
ALL OFF
NV-GRC1
REMOTE CONTROL
FAVORITES
VOLUME
1 2 3
4 5 6
7 8 9
11 10 12
SOURCE/OK
PWR MUTE
SLEEP DISP
MENU
G2 G1
F1 F2
F3 F4
1
2
3
4
5
6
7
8
9
10
11
12
13
9.3 NV-GRC1 Remote Control
1. Power: Each zone can be turned on and off, or all zones can be
turned off with this button.
2. Volume: This serves two functions. In normal operation mode, it
is a volume control, but when you are using the menu features of
the Control Pad, it allows scrolling up and down.
3. Function Buttons: These buttons are currently inactive and
designed for future use.
4. Forward and Reverse: These IR programmable buttons are
designed for forward and reverse functions.
5. Favorites: A function of the Renovia System is the ability to
access user defined favorites for easy access. The first twelve are
directly accessible using the RC1 Favorites buttons.
6. DISP: This button allows access to the Display dim menu available
at each Control Pad.
7. Function LED: This LED (Light Emitting Diode) lights to indicate
a button push.
8. MUTE: The RC1 remote provides a discrete mute function to
quickly silence the zone's output.
9. SOURCE/OK: This is another dual function button. In normal
playback mode it scrolls through the sources, and in menu mode it
selects a highlighted menu choice.
10. Play/Pause: This IR programmable button toggles between the
play and pause functions of the chosen source. When using the T2G
Tuners, this button toggles through the Tuners receive modes.
11. MENU: This button enters the menu features of the Control Pad.
When in Menu mode, the volume up and down buttons scroll
through the menu choices.
12. Sleep: This allows access to the sleep timer mode.
13. G1 and G2: These buttons are currently inactive. They are
designed for future use.
An optional accessory for Renovia control is the NV-GRC1 handheld remote control. It is a hard button remote that issues digital commands to the
zone Control Pad. It enables the Control Pad IR receiver to act on commands for third party IR commands stored in the System’s configuration.
Remember, the Renovia System is unable to repeat third party IR commands across the powerline, but it will respond to the received commands
from the NV-GRC1. No external programming is required.