Nuvo Stereo System - Manual (Page 56)

48
Capturing IR codes using the IR Learning Station Interface (as shown in Fig. 81)
The Renovia Configurator Software is designed to store IR codes for audio equipment in an IR Library. When the codes are learned for a given piece
of equipment, they are held in the library under that equipment's manufacturer name and model number. Once learned, any of the equipment in
the library can be imported into a new Configuration.
To learn new equipment codes, the Learning Station Interface box must be connected to your computer at the RS232 port. Connect the male end of
the RS232 cable to the back of the Interface box into the “CONNECT TO PC” input. At this point, it is not necessary to have the Interface box
connected to the Renovia amplifier.
When setting up a new source, each type of equipment has a pre-selected set of functions. By double-clicking on a function or clicking on the
“Record” button in the software, you will open the record window. You will see the “READY” LED light on the interface box. Aim the source's remote
control at the “IR SENSOR” on the Interface and press the desired function button on the remote. The IR learning window in the Configurator
Software will indicate that the code has been successfully learned.
Fig. 81