Nx Networks NX series User Manual
Page 54
54(86)
Control keypad
7
Parameter lock (P6.3.2)).
Return to the Main menu anytime by pressing the
left arrow menu button
for 1—2 seconds.
The basic application package includes seven applications with different sets of parameters. The
parameter lists are in the Application Section of this manual.
Once in the last parameter of a parameter group, To move directly to the first parameter of that
group press the
Browser button up
.
See the diagram for parameter value change procedure on page 55.
Note: Instead of connecting power to the frequency converter, it is possible to power up the
control board from an external power source by connecting the external power source to
bidirectional terminal #6 of the NXOPTA1 board (see page 43) or to the corresponding +24V
terminal on any other option board. This voltage is high enough to set parameter values or to
keep the fieldbus active.