Nx Networks NX series - Manual (Page 49)

Control keypad 49(86)
7
7.2 Keypad push-buttons
The alphanumeric control keypad features 9 push-buttons that are used for the control of the
frequency converter (and motor), parameter setting and value monitoring.
Figure 7-2. Keypad push-buttons
7.2.1 Button descriptions
reset = This button is used to reset active faults (see Chapter 7.3.4).
select = This button is used to switch between two latest displays. May be useful to
see how the changed new value influences some other value.
enter = The Enter button serves for:
1) confirmation of selections
2) fault history reset (2…3 seconds)
= Browser button up
Browse the main menu and the pages of different submenus.
Edit values.
= Browser button down
Browse the main menu and the pages of different submenus.
Edit values.
= Left arrow menu button
Move backward in menu.
Move cursor left (in
parameter menu ).
Exit edit mode.
Hold down for 2…3 seconds to return to main menu.
= Right arrow menu button
Move forward in menu.
Move cursor right (in
parameter menu ).
Enter edit mode.
!
"
–
#
! ! ! !
" " " "