Nortel Networks BSG12aw - Manual (Page 56)

56 ADSL WAN module replacement
NN47928-302 NN47928-302
Variable definitions
Use the data in the following table to use the fields in the logon page.
Saving the running configuration to Flash using the CLI
Use this procedure to save the running configuration using the CLI.
Procedure steps
Step Action
1 Launch an SSH session.
2 Log on to the BSG12aw using the user ID and password.
3 At the prompt, enter the following command:
write startup-config
End
Variable definitions
Use the data in the following table to use the fields in the logon page.
Replacing the ADSL WAN module
Use this procedure to replace the ADSLWAN module in the BSG12aw.
Procedure steps
Step Action
Variable Value
User Name Specify the user name. The
default logon name is
nnadmin.
Password Specify the password. The
default password is
PlsChgMe!.
Variable Value
User Name Specify the user name. The
default logon name is
nnadmin.
Password Specify the password. The
default password is
PlsChgMe!.