System verification, System verification navigation, Prerequisites for system verification – Nortel Networks BSG12aw User Manual
Page 51
51
Installation
System verification
The following sections describe how to test the basic functionality of the Business Services
Gateway 8-port (BSG8ew) and the Business Services Gateway 12-port (BSG12ew/aw/tw).
System verification navigation
•
“Verifying the physical system status” on page 51
Prerequisites for system verification
•
The BSG8ew/12ew/aw/tw must be connected and powered up.
Verifying the physical system status
Complete this procedure to verify the status of the system.
For information and procedures on monitoring system status using the BSG8ew/12ew/aw/tw Web
user interface, see Administration (NN47928-600).
Procedure steps
Step
Action
1
Check the status of the power LED to verify that the system is receiving power.
2
Check the status of the system LED to verify that the system is active.
End