NEC SP5008A User Manual
Page 74
73
z
Password protected for Admin access authority
Networking
z
PPPoE Client, DHCP Client / Server, NAT, SNTP
z
QoS: DiffServ / ToS
Management
z
User interface: HTTP and Telnet
z
Firmware upgrade via FTP/TFTP/HTTP/Telnet
z
Auto Provisioning
Environment
z
Operating Temperature: 0 – 45 degree C
z
Storage Temperature: 0 – 55 degree C
z
Operating Humidity: 10 to 85% (non-condensing)
z
Storage Humidity: 10 to 95% (non-condensing)
Power Supply
DC 12V, 3A
Emission
CE
FCC Part 15, Class B
Model
SP5018A
Standards
z
SIPv2 (RFC 3261): Primary and Secondary Proxy, Primary and
Secondary Outbound Proxy
Interface
z
1 x RJ-45 WAN port of 10/100M
z
4 x RJ-45 LAN ports of 10/100M
z
4 x RJ-11 FXS ports for connecting with phone set and fax machine
z
4 x RJ-11 FXO ports for connecting with PSTN line or PABX’s extension
Voice Processing
z
Codec: G.711a/mu-law, G.723.1 (6.3K), G.729, G.729.A
z
VAD, CNG, and Silence Suppression
z
Echo Cancellation (G.165 / G.168)
z
Adaptive Jitter Buffer
z
Packet Loss Compensation
z
Adjustable volume level
z
DTMF relay: In-band, RFC 2833, SIP Info
Call Features
z
Caller ID Detection: FSK, DTMF, ETSI (before ringing, between ringing)
z
Call hold
z
Call transfer (blind & consultant)
z
Call forward (Unconditional, No answer, Busy)
z
MWI (Message Waiting Indication)
z
FAX over IP: G.711 pass-through, T.38 Fax relay
z
PSTN Lifeline: PSTN bypass if network or system fails
z
Detection of disconnect tone, polarity reversal, and loop current drop (zero
voltage) on FXO ports