NEC SP5008A - Manual (Page 35)

34
3.1.8 Syslog Setting
This syslog is used to send the debug log from MICRONET SP5008A / SP5018A /
SP5058A to syslog server.
Syslog mode Select the Syslog mode for Enable or Disable. If
you Enable this feature, please specify the
Syslog Server address and port number at the
Syslog server address and port’s text box, then
you can get detail system log from Syslog server.
Syslog Server address If you Enable the Syslog mode, please specify
the IP address of Syslog Sever for data storage.
Syslog Server port Specify the Syslog Server port number,
The default port number is 514.
1. Press the “Apply” button (at the bottom) after you finish to save changes.
2. Press the “Reboot” button to apply the changes.
NOTE: To receive the SYSLOG debug information, you need to have a syslogd
server to collect the debug information from MICRONET SP5008A / SP5018A /
SP5058A . The following is a tool you can be used for testing purpose which can be
downloaded from http://tftpd32.jounin.net/. You need to enable syslog server from
settings before you can use it.