NEC SP5008A - Manual (Page 12)

11
Item Description Static IP DHCP PPPoE
Default gateway Specify the IP address of the default
gateway.
V
Remote access
restriction
Restricts/Blocks users connecting to
the WAN port’s IP remotely, you can
Enable/Disable this option.
V V V
PPPoE userID Specify the username of the PPPoE
account
V
PPPoE password Specify the password associated to
the PPPoE account above.
V
Reboot after remote
host disconnection
When the remote host (PPPoE)
fails, the gateway will retry 3 times
to reconnect, if there is no reply
from the remote host within 3 tries,
then the gateway will reboot. You
can Enable/Disable this option.
V
2.2.1 Static IP
1. Press the “Apply” button (at the bottom) after you finish to save changes.