NEC SP5008A User Manual

Page 46

NOTE: If the disconnect tone only has single frequency,

please set it to low frequency. If the disconnect tone

only has single cadence, please set it to Tone 1.

Disconnect tone 2

Specify the pattern of the disconnect tone for disconnect

tone 2 (second set), you can adjust the high frequency,

low frequency, high level, low level, the On and Off time

for tone 1 and 2.

NOTE: If the disconnect tone only has single frequency,

please set it to low frequency. If the disconnect tone

only has single cadence, please set it to Tone 1.

1. Press the “Apply” button (at the bottom) after you finish to save changes.

2. Press the “Reboot” button to apply the changes.