NEC SP5008A - Manual (Page 72)

71
Primary proxy/P2P IP
(Peer A / Peer B)
Specify the destination IP Address of Peer to
Peer mode, and specify the port# with 5076.
In this application, we define the Peer to Peer
mode in 2 groups. If you want to make call
to others IP addresses, please refer to the
paragraph 3.3.7 Speed dial setting.
Call number configuration
Representative number
(Peer A / Peer B)
Enable the representative line
Line 1~Line 8
(Peer A / Peer B)
Please refer to the figure shown above, Enable
all the line and Disable all the register of two
sides.
Specify the relevant data: Account, number,
password and display name.
3. Press the “Apply” button (at the bottom) after you finish to save changes.
4. Press the “Reboot” button to apply the changes.