NComputing L300 - Manual (Page 9)

L300/L230/L130 User Manual
9
Installation
vSpace software installation
Per the instructions below, always check the NComputing website for the latest vSpace software. The
software on the CD in your package may not be the latest version.

Insert the software installation CD into the host computer's
CD drive. In most cases, a window will automatically
appear after a few seconds with installation options. If it
does not appear, go to "My Computer," open the CD
drive's icon, and start the "Setup" application.

At the initial setup screen, click the "Download Latest
Software" button. This will launch a browser window at
the NComputing Software Download Center. Locate the
correct software based on product model and operating
system, and download the corresponding “zip” folder.

Note that the current version of vSpace is always located
at www.ncomputing.com/downloads
 If internet access is unavailable, click “Browse CD” to locate the installer file per the next step

After downloading and extracting the installer files, or alternately locating them on the product CD, run
the vSpace Installer by launching “setup.exe” (vSpace 4) or the *.MSI installer (vSpace 6) for a first time
installation. If you are updating an existing vSpace installation, refer to the Release Notes for specific
install instructions.

At the
installer’s "Welcome" screen, click on the "Next" button which will take you to the antivirus and
firewall warning screen. Read and follow the instructions, then click on the "Next" button.