NComputing L300 - Manual (Page 16)

L300/L230/L130 User Manual
16
If you choose to use a static IP address, you must enter the IP address and the default gateway. Then click on
the "Save" button.
Installation with monitor mount
The L130 and L230 products include a monitor mount, mounting collar, monitor mount screws (silver color) and
mounting collar screws (black color) for mounting it to the back of a monitor.
L130/L230 Firmware Update
L130 and L230 access devices will automatically download firmware from vSpace when booting, if a newer
firmware version is on the host system than what is loaded in the device. This dynamic firmware will only
persist as long as the L130/L230 device is powered on. To make the latest firmware persist, power on the
device and select the "Update" tab and click on the "Update" button. When the access device asks you for a
password, enter "updateme" (without the quotes). Your access device will walk you through the process of
updating the firmware
. For more details refer to the section “Using Your L-series Access Device” later in this
user manual.
These pictures show the L230 mounting process, and the final product, fully mounted and ready for use.