NComputing L300 - Manual (Page 40)

L300/L230/L130 User Manual
40
The "System Settings" tree item shows the following settings for the vSpace software. Double-clicking on the
name of the setting allows you to adjust it (unless it is read-only, which is specified below).

Maximum number of stations (incl. Host): Displays the maximum number of sessions the vSpace
software is configured to support. This number includes the host PC. This setting is read-only.

Current number of sessions: Displays the number of active sessions. This setting is read-only.

This machine: Displays the name of the host PC. This setting is read-only.

This user: Displays the currently logged- in user’s username. This setting is read-only.

System uptime: Displays how long the host computer has been logged on. This setting is read-only.

Main Station AutoLogon: Displays whether or not the host PC is set to automatically logon at boot-up.

Delay until shutdown (seconds): Displays the default amount of time after a shutdown command is
issued on the host until the shutdown occurs. After the shutdown command is issued on the host, the
shutdown timer starts. Then, a window pops up on each access device that tells the users they must