NComputing L300 User Manual
Page 15
L300/L230/L130 User Manual
15
L130 and L230 Device Setup
The access device must be connected via Ethernet to the host PC. This can be done using an Ethernet switch,
a router, or some other network connection method.
Network connection
If the network is configured to use DHCP to get dynamic IP addresses, you can set up the access device to
use it. Turn on the access devices and once you see the main screen select the "Options" button, and then
select the “Setup” button.
In the "Network" tab, select whether to use a dynamic IP address or a static IP address.
If you choose to use a dynamic IP address, click on the "Save" button.