NComputing L300 User Manual
Page 10

L300/L230/L130 User Manual
10
At the software End User License Agreement and Terms of Use screens, read the agreements and if
you agree, click on the "I agree" checkbox, and then click on the "Next" button.
At the “Additional Options” screen (vSpace 4 only), you have the option to install the Network
Administrator Console on this host. If you choose to use an administrator password, enter it and
retype it. Click on the "Next" button. For vSpace 6 the NC Console is automatically installed on each
host.
At
the final “Confirm Installation” screen, click “Install” to begin the software installation and then follow
the additional prompts. This process may take up to 5 minutes to complete, and it is normal for the
system to beep frequently. The installer may appear to stop, but if the mouse cursor regularly
switches between the pointer and the hourglass, everything should be proceeding normally. If the
installer takes longer than 15 minutes to complete, please contact NComputing technical support for
assistance.
At the "vSpace successfully installed" screen, click
“Close” to end the installer, and select whether or
not to immediately restart the computer (a restart is required before vSpace can be used).
Proceed to the following sections to connect your L-series devices, register and activate the software
and devices and update the device firmware (as needed).
Note:
When dealing with certain firewall applications, you may need to make sure that the
NComputing .exe files have proper access permission to the network. These .exe files include:
KMSERVC.EXE, BOOTSRV.EXE, KMMSG.EXE, KMUPDATE.EXE, KMREGWIZ.EXE
Within the Exceptions tab of the Windows Firewall the ports that should be opened are:
TCP-Protocol: 27605, 27615, 3581, 3597, 3645, 3646, 3725
UDP-Protocol: 1027, 1283, 3581, 3725
Please see our Knowledge Base at
for more details.