NComputing L300 - Manual (Page 17)

L300/L230/L130 User Manual
17
Product Registration
Product registration is required for all L-series devices and vSpace software to enable normal product use,
downloading updates, and technical support. Prior to registering, sessions will time out after one hour and
devices will not be able to connect after 30 days. When registering the software, all the access devices must
be connected to the host system using Ethernet.
Select "vSpace Registration" in the Windows Start menu.

At the registration program “welcome” screen, if vSpace password protection is turned on, you will need
to enter your password. Then click the "Next" button.

Next, you are presented with the vSpace End User License Agreement (EULA). If you agree, click in
th
e “I agree” check box, and then click the “Next” button.
Important!
DEVICE AND VSPACE SOFTWARE REGISTRATION ARE REQUIRED.
UNTIL YOU HAVE REGISTERED, SESSIONS WILL TIME OUT AND DISCONNECT AFTER 1 HOUR.
YOU HAVE 30 DAYS AFTER THE INITIAL INSTALLATION TO REGISTER. IF YOU DO NOT
REGISTER WITHIN 30 DAYS, DEVICES WILL NOT BE ABLE TO CONNECT TO THE HOST. IF
THE 30 DAY LIMIT IS REACHED YOU CAN STILL ACCESS THE REGISTRATION WIZARD ON THE
HOST TO COMPLETE REGISTRATION.
vSpace 4 on Server 2003 vSpace 6 on Server 2008 R2