NComputing L300 User Manual
Page 35

L300/L230/L130 User Manual
35
The “Update” Tab
Your NComputing L-Series access device may at times require a persistent firmware update (versus a non-
persistent dynamic firmware update on boot-up if a newer version is on the server). To perform a persistent
firmware update, select the "Update" tab and click on the "Update" button. When the access device asks you
for a password, enter "updateme" (without the quotes). Your access device will walk you through the process
of updating the firmware.
It is crucially important that you follow the instructions. If you turn off the access device during the firmware
update process, it may become non-functional.
After the firmware update process is complete, reset the access device by turning it off and on.
Certain changes in the vSpace software may require a persistent firmware update in each access device
connecting to it. Read the Release Notes for a given vSpace update to see if such a firmware update is
required for the given vSpace release.