NComputing L300 - Manual (Page 21)

L300/L230/L130 User Manual
21
 You’ll need to select the location where you wish to store the registration data file that you’ll later email
to NComputing.
Note that you cannot type directly into the “Create activation file” field, but you must
click on the “Select” button to navigate to the directory where you wish to store the offline registration
data file.

The window below shows the navigation screen that allows you to place the data file in the desired
location. Feel free to change the “File name” to something other than “activation” – but don’t change
the “Save as type” field. The registration file must be of type “txt” – even though the data inside is
encrypted and must not be modified.
 Before the registration wizard writes the data file, you will get a “Summary” screen showing all user
information that will be written to the data file. Also, any connected but unregistered L-series access
devices will be listed for registration.

If the information is correct, click the “Register” button or click “Back” if you wish to change any of the
information.

Next, email the created “txt” file to [email protected] . Alternately, you can copy the “txt”
file to another PC, if necessary, to send the email.