NComputing L300 User Manual
Page 13
L300/L230/L130 User Manual
13
If static addressing configurations are used on the network,
select “Static configuration” and supply the
appropriate IP, Subnet Mask, Gateway, and DNS server (primary and alternate) information
. Click “OK” to
save changes and return to the main screen.
When your L300 device is connected to the network the “LNK” light (indicating Ethernet link) on the L300 front
panel should be on
and you should see that the Ethernet activity light, “ACT,” also blinks when there is active
Ethernet traffic to/from the device.
Installation with monitor mount
The L300 device comes with a mounting plate and two mounting screws, which can be secured to a monitor
via 75mm or 100mm VESA
™-compliant mounting holes. The L300 device then attaches to the mounting
plate, resulting in a zero-footprint workstation. In general, we recommend using the top two mounting holes
on the monitor to give maximum cable access space.
Note: The L300 product also comes with a Kensington
™ security lock interface, for additional theft protection.