Nortel Networks VT100 - Manual (Page 47)

3-8 Getting started
555-9001-316 Standard 1.0 February 1996
You want to set up the VT100 Gateway to initialize the sessions as follows:
• initialize sessions 2-3 for accounting with acctinit.act ,
• initialize sessions 4-8 for market with login.act ,
• initialize sessions 9-10 for banking with login.act , and
• initialize sessions 15-17 for airline with signin.act
Figure 3-5 illustrates how you should set up trs.conf to implement the
configuration for only the accounting application.
Figure 3-5
trs.conf file for accounting application
The trs.conf file as shown in Figure 3-5 relates to the initial-action template
shown in Figure 3-9.
Setting up the vt100.ctl file
The vt100.ctl file must be created and stored in the /u/ivr/vt100 directory
before you can use the VT100 Gateway. The vt100.ctl file configures the
terminal type for each session and corresponds to the sessions defined in the
trs.conf file.
Each line in the vt100.ctl file uses the syntax shown in Figure 3-6.
#trs.conf file to set up sessions for the IVR Generator application processor
accounting:0>2-3:acctinit:ping@60:vt100