Nortel Networks VT100 - Manual (Page 43)

3-4 Getting started
555-9001-316 Standard 1.0 February 1996
Note: The TRS considers the begin string and the end string part of the data.
See Figure 3-2 for an example of the screen.conf file.
Figure 3-2
screen.conf file
In Figure 3-2, PROGRAM MENU is the keyword for the first screen. Since
it contains a “s13is” case, it also searches for the begin string PROGRAM
MENU . Upon finding the begin and end string, the TRS continues the
transaction.
If your host application screens do not have enough unique keywords or if the
application demonstrates unpredictable screen behavior, then you have
difficulty making a
screen.conf file. In this case refer to the
MAX_WAIT_TIME entry in the com.conf file discussed in Chapter 3.
Setting up the trs.conf file
The trs.conf file specifies the initial-action template for each session you
define on the IVR 2.0/I application processor. The trs.conf file must reside in
the /u/ivr/3270 directory. Figure 3-3 shows the syntax for the trs.conf file.
Meridian IVR