NorthStar Navigation 8000I User Manual
Northstar 8000i
Table of contents
Document Outline
- 1 Preface
- Contents
- 2 Introducing the Northstar 8000i System
- 3 Check the Black Box Processor parts
- 4 The Black Box Processor connectors
- 5 The Network Master Unit
- 6 8000i System Installation
- 6.1 Northstar 8000i 12 inch Display Processor
- 6.2 Northstar 8000i Black Box Processor
- 6.3 Northstar 8000i 15 inch Monitor
- 6.4 Northstar 8000i Network Radar
- 6.5 Northstar 8000i 8 Port Network Linker
- 6.6 Northstar 8000i 4 Port USB Hub
- 6.7 Northstar 8000i 1 kW Network Sounder
- 6.8 Northstar 8000i DVD-CD Player
- 6.9 Northstar 8000i Remote Keypad
- 6.10 Northstar 8000i Video Interface
- 6.11 Northstar 8000i C-MAP Chart License Key
- 6.12 Northstar GPS Antenna (NS004743)
- 6.13 Other Components
- 7 Mount the Black Box Processor
- 8 Wiring Guidelines
- 9 Example System Layouts
- 10 Northstar 8000i Initial Setup
- 10.1 Turn on the 12 inch Display Processor
- 10.2 Adjust the brightness on a 12 inch Display Processor
- 10.3 Set the network master unit
- 10.4 Install the chart data
- 10.5 Turn off the 12 inch Display Processor
- 10.6 Set the system preferences
- 10.7 Specify your vessel statistics
- 10.8 Set the location of the media library
- 10.9 Set NMEA Output
- 10.10 Set NMEA Baud Rate
- 10.11 Calibrate the touch screen
- 10.12 Set the device (processor) name
- 10.13 Set the screen resolution
- 10.14 Set the units
- 10.15 Radar
- 10.16 Sounder
- 10.17 Instruments
- 11 Maintenance
- 12 Restore
- 13 Upgrading the 8000i system