NorthStar Navigation 8000I - Manual (Page 83)

83 Northstar 8000i Black Box Processor
2. If the client processor was running when the master was upgraded it will display
am message saying the software is incompatible with the master and prompt you
to upgrade. Power down the unit and restart. The upgrade will commence
automatically
13.3 Install a system image upgrade
System image upgrade
1. Start the 8000i processor and wait till system has finished loading and is running
normally
2. Back up user settings (recommended)
3. Make sure there are no USB pen drives or other USB mass storage devices attached
to the system. This can cause problems and possibly result in a mass storage device
losing its data
4. Start the 8000i processor and wait till system has finished loading and is running
normally
5. Make sure the 8000i DVD is connected to the processor being upgraded. Insert the
image DVD (this can be obtained from your Northstar dealer.
6. Select Display .
7. Select Installation .
8. Select Software upgrade
9. Acknowledge that there is no software upgrade available and go to image upgrade
page by selecting OK
10. Select the location of the Image: