3 set the network master unit – NorthStar Navigation 8000I User Manual
Page 62
62
Northstar 8000i Black Box Processor
10.3 Set the network master unit
When starting the processor for the first time, the system needs to be told which is going to
be the master on the network. This also applies for stand alone processors. The following
screen will appear
To set the master
. select
Retry Master Selection
. select the unit to become master.
. press
Select As Master
. select
Return
to exit master selection
. select Launch Chart Manager to install charts (see "Install the chart data" page 63)