NorthStar Navigation 8000I - Manual (Page 14)

14 Northstar 8000i Black Box Processor
idea to use the provided System Setup Check sheet. This will provide a record of the
settings on install and serve as a reminder to check all settings.
14. Install purchased charts. (see "Install the chart data" page 63)
15. Configure System attributes such as time offset, draft, NMEA output etc (see
"Northstar 8000i Initial Setup" page 61).
16. Power on the next processor and nominate the master processor when prompted
(this can be done form this processor or from the master). Setup the processor.
Repeat till all processors are on and configured.
NOTE: Pay particular attention to wiring constraints, and cable installation.
6.1 Northstar 8000i 12 inch Display Processor
Northstar 8000i 12" Display Processor NS004700
Description
The 12" Display Processor is an 8000i Processor and 12" Display rolled into one. It shares the
same processor internal components as the 8000i Black Box Processor. The 12" Display has a
direct bonded anti reflective coating using an infrared touch screen to control the system.
The system can also be controlled by the built in Keypad, or by the optional 8000i Remote
Keypad.
Place in 8000i System
The 12" Display Processor is used to view and control the 8000i Software. The 12" Display
Processor also provides interface to external devices both within the 8000i range of products
and with external devices such as an autopilot and other instruments. The unit can be stand
alone or be connected the 8000i Network as part of a multi processor system. If this is to be
the master processor be sure to have easy access to one of the USB ports for future upgrades
of the system. Use the provided USB panel mount cable if necessary
Optional Parts
GPS Antenna (see "Northstar GPS Antenna (NS004743)" page 25),
Network Sounder (see "Northstar 8000i 1 kW Network Sounder" page 21),
Network Radar (see "Northstar 8000i Network Radar" page 18),
Chart licences (see "Northstar 8000i C-MAP Chart License Key" page 24),
USB Hub, Network Linker, DVD/CD Player, USB Video Interface, Remote Keypad, ethernet
cables if connecting to network.
Other Functions
1 x NMEA in, 1 x NMEA out, NavBus, external alarms, repeater video out (800 x 600),