NorthStar Navigation 8000I User Manual
Page 53
53
Northstar 8000i Black Box Processor
Before crimp
After crimp
A
Crimp tool. The crimp tools jaw presses the gold plated contacts down so they pierce
through the insulation of all eight wires to make contact with the copper conductor
B Network
cable
C
Make sure sheath is pushed well inside the connector
14. Cut any spare shield wire close to the plug
16. Slide the gasket, body and locking nut over the RJ45 connector slide
17. Slide the sealing nut and seal towards the body and screw together.