4 select the volume units for liquids, 5 select the large scale distance units, 6 select the small scale distance units – NorthStar Navigation 8000I User Manual
Page 71
71
Northstar 8000i Black Box Processor
2. Select
Setup
from the control panel.
3. Select
+ Units
to display a list of unit specification options.
4. The
Pressure Units
button shows the current setting. Select the button if you
want to change the setting and a drop down list of choices appears.
5. Select the new setting. The new setting is applied immediately and stays until you
change it again.
6. When you are finished, select
– Units
.
10.14.4 Select the volume units for liquids
You can select from US Gallons, Liters, or Imperial Gallons for volume units for measuring
liquids. US Gallons is the default.
To select the volume units for liquids:
1. Select
Display
.
2. Select
Setup
from the control panel.
3. Select
+ Units
to display a list of unit specification options.
4. The
Liquid Volume Units
button shows the current setting. Select the button if
you want to change the setting and a drop down list of choices appears.
5. Select the new setting. The new setting is applied immediately and stays until you
change it again.
6. When you are finished, select
– Units
.
10.14.5 Select the large scale distance units
You can select from Nautical Miles, Statute Miles, or Kilometers for large scale distances.
Nautical Miles is the default.
To select the large scale distance units:
1. Select
Display
.
2. Select
Setup
from the control panel.
3. Select
+ Units
to display a list of unit specification options.
4. The
Distance Units
button shows the current setting. Select the button if you want
to change the setting and a drop down list of choices appears.
5. Select the new setting. The new setting is applied immediately and stays until you
change it again.
6. When you are finished, select
– Units
.
10.14.6 Select the small scale distance units
You can select from Yards, Feet, or Meters for small scale distances. Yards is the default.
To select the small scale distance units:
1. Select
Display
.
2. Select
Setup
from the control panel.
3. Select
+ Units
to display a list of unit specification options.
4. The
Distance Units Small
button shows the current setting. Select the button if
you want to change the setting and a drop down list of choices appears.
5. Select the new setting. The new setting is applied immediately and stays until you
change it again.
6. When you are finished, select
– Units
.