NorthStar Navigation 8000I - Manual (Page 17)

17 Northstar 8000i Black Box Processor
Place in 8000i System
Primarily to display the 8000i software from a Northstar 8000i Black Box Processor. The 15"
Monitor may also be used to display the video output of a PC or compatible video source,
composite, S-video and DVI video sources.
Other parts required
For connecting to external 3rd party video sources, order the following cables
VGA DB15 Video cable 6 ft (2 m) NS004710
Composite Video cable 6 ft (2 m) NS004803
DVI-D Video cable 6 ft (2 m) NS004805
S-Video cable 6 ft (2 m) NS004804
Other Functions
The 15" Display has 2 x VGA inputs, 1 x DVI connector, 2 x composite video inputs, 2 x S-video
inputs. Internal 2 Port USB Hub. It may also control the power state of a Northstar Black Box
Processor
Location Guide
The 15" Display is sunlight viewable, with an anti reflective coating. For best results position
out of direct sunlight. The ideal location should have minimal glare from windows or bright
objects. The unit is waterproof to IPX5 specification.
If connecting to the USB port of a Black Box Processor, mount no further than a 16.5 ft (5 m)
cable run: mount any USB peripherals no further than 16.5 ft (5 m) away
Mounting
The unit can be flush mounted or mounted on a third party VESA bracket using the holes in
the rear of the case.
Power requirements
Operation Voltage (once
powered) 10 V - 35 V DC
Operation Voltage less than
1 min 7 V - 9 V DC
Power consumption @12 V 60 W
Fuse 10 Amp @12 V DC (5 Amp @ 24 V DC)