National Instruments Module SCXI-1503 - Manual (Page 77)

Index
SCXI-1503 User Manual I-2 ni.com
conventions used in the manual, iv
creating a task
DAQ Assistant, 5-3
programmatically, 5-3
current output channels, questions
about, C-1, C-3
current sources, operating, 4-4
custom cables, 2-1
D
DAQ Assistant, creating a task, 5-3
DAQ device
accessing unused analog input
channels, C-2
DAQ devices
unavailable digital lines, C-2
digital control circuitry, 4-3
dynamic characteristics specifications, A-3
E
E/M Series DAQ devices, 4-4
electromagnetic compatibility
specifications, A-6
environment specifications, A-4
excitation specifications, A-4
F
filters specifications, A-3
front connector
pin assignments (table), 2-8
G
gain/input range, configuration, 3-1
I
input characteristics specifications, A-1
installation into SCXI chassis, 1-4
L
LabVIEW
developing an application, 5-8
programming a task (table), 5-8
using a NI-DAQmx channel property
node, 5-10
LabWindows/CVI
creating code for using SCXI-1503, 5-11
M
maximum working voltage specifications, A-5
Measurement & Automation Explorer
configurable settings, 3-2
removing the SCXI-1503, B-1
measurement properties, NI-DAQmx
RTD (table), 5-5
thermistor (table), 5-6
thermocouple (table), 5-7
voltage (table), 5-4
Measurement Studio
creating code for using SCXI-1503, 5-12
multiplexed mode operation
theory, 4-4
multiplexing
analog input signals, 4-4
SCXI-1503, 4-4
with AI 0 signal, 2-11
N
NI-DAQ version required, C-1
NI-DAQmx
configurable settings, 3-3
developing applications, 5-1
acquiring, analyzing, and
presenting, 5-7
adjusting timing and triggering, 5-3
completing, 5-8
configuring channel properties, 5-4
LabVIEW, 5-8