Pioneer DVJ-1000 - Manual (Page 46)

Advanced Operations (Operations Using Memory Cards)
44
En
REV
FWD
DIRECTION
HOT CUE
REC MODE
LOOP
OUT ADJUST
TEMPO
IN ADJUST
ENTER
CUE
REALTIME CUE IN OUT RELOOP/ EXIT 4-BEAT
ONE-TRACK
CUE / LOOP CALL
BACK & FORTH
ANGLE SUBTITLE AUDIO DISPLAY DELETE MEMORY MENU T.MENU RETURN SETUP
TOUCH/BRAKE
RELEASE/START
JOG MODE
VINYL
HYPERJOG MODE
TEMPO
MASTER TEMPO
WIDE
TEXT MODE
TIME MODE AUTO CUE
DVD TITLE MP3 FOLDER
JOG ADJUST
LIGHT
HEAVY
TEMPO
RESET
REV FWD
POWER OFF ON
STOP
LOCK UNLOCK
EJECT
PLAY/PAUSE
DVJ-1000
PREVIOUS NEXT
FWD REV
ENTER
CUE/LOOP
CALL
MEMORY
C
A
B
HOT CUE
HOT CUE
REC MODE
ENTER
■ Message displays during recording of cue and loop points
Player display
“CARD MEMORY”
“CANNOT MEMORIZE ON THIS CARD”
“CARD FULL”
“CARD PROTECTED”
“INTERNAL MEMORY”, followed by
“NO CARD”
“INTERNAL MEMORY”, followed by
“CLOSE CARD DOOR”
“UNFORMAT”
“CARD ERROR”
“POINT FULL”
“CARD MEMORY”, followed by
“PICTURE IS NOT RECORDED”
Contents
Cue point or loop point data have been successfully recorded on the memory card.
Displayed during DVD/MP3 playback, when a memory card formatted and recorded using the CDJ-
1000 or CDJ-1000MK2 has been loaded on this unit and an attempt is made to record data to the card.
Point data cannot be recorded.
Insufficient space remains on the memory card. Point data cannot be recorded to the card.
The memory card’s LOCK (write protect) function is enabled, and further point data cannot be recorded
on the card.
No memory card is loaded.
A memory card is loaded, but the memory card door has not been closed. Close the door and retry.
Displayed when the loaded memory card does not conform to SD memory card standards, or has not
been formatted to CDJ-1000 or CDJ-1000MK2 (MMC) standards. Point data cannot be recorded on
the card.
The loaded memory card appears to be damaged.
Displayed when the total number of recorded cue points and loop points has already reached 100.
Displayed when an attempt is made to record points from a copy-protected disc. Thumbnail image is
not recorded.
Insert memory card whenever recording cue point data, loop point data, hot cue data, or WAVE data. If no memory card is inserted, any designated
setting data will be lost when the power is turned off or the disc is removed.
■ Recording a loop point
1. Set a loop-in point and loop-out point and begin loop play-
back.
2. During loop playback, press the MEMORY button.
¶ The display will show the cue point position data, and the word
“CARD MEMORY” will appear in the display, indicating that the
loop-in and loop-out points have been stored in the memory card.
¶ If no memory card is loaded, the “NO CARD” message will ap-
pear.
¶ If the memory card door is open without any memory card being
loaded, the message “CLOSE CARD DOOR” will appear in the
display.
■ Recording hot cue points A, B, C
Hot cue points A, B, and C are automatically recorded on the memory
card.
■ WAVE display
Wave displays are automatically recorded on the memory card.
* As one example of the use of a 32 MB SD memory card, up to 75
discs’ worth of cue and loop points can be recorded per card (assum-
ing use of DVD discs with 20 points per disc, and recording of thumb-
nail images for each point).
To recall data recorded on memory cards
■ To recall a recorded cue or loop point
1. Press the CUE/LOOP CALL button.
¶ The preview monitor screen will display the cue point navigation
menu.
1–006 0.00.39 CUE
ENTER CALL C B A
While the call screen is displayed,
point information is also shown
on the player’s display.