Paxar Monarch 9413 - Manual (Page 92)

D e f i n i n g t h e B a t c h C o n t r o l F i e l d
The batch header must precede this field. The batch control field
defines the print job and applies only to the batch that
immediately follows.
Syntax E,feed_mode,batch_sep,print_mult,
multi_part
p
E1. E Batch Control Field.
E2. feed_mode Feed Mode. Options:
0 Continuous Feed (default)
1 On-demand
For the 9412/9413 printers, you must have the on-demand
sensor installed to use on-demand mode. Also, the feed
mode is determined by the presence of the on-demand
sensor, not from this parameter. If the on-demand sensor is
open, you are using on-demand mode. If the on-demand
sensor is closed, you are using continuous mode. There is a
switch on the 9414 printer for on-demand mode. Refer to your
Equipment Manual for more information.
E3. batch_sep Batch Separator (striped label in between batches). Options:
0 Does not print a separator (default)
1 Prints a separator
E4. print_mult Number of tags with the same image. Range: 1 to 999
E5. multi_part Number of identical parts on one tag. Range: 1 to 5
Example E,0,1,4,2 p
Defines a batch control field. Continuous feed mode is used and
a separator prints between batches. Four tags have the same
image and there are two identical parts on one tag.
6-4 Printing