Paxar Monarch 9413 User Manual
Page 129
412
There is a problem with flow control between the printer
and the host. Make sure the printer and the host flow
control settings match (both are DTR or both are
XON/XOFF). If the error persists, call Technical
Support.
413
Online receive queue is full. Check your printer’s
XON/XOFF or DTR SETUP values to be sure there isn’t
a flow control problem.
414
The internal keyboard buffer is full or you need a new
keypad. Call Technical Support.
415
The buffer size you defined exceeds the total available
in your machine.
416
Flash/PC board error. Call Technical Support.
417
Flash memory is full. Clear flash through the 9403
printer’s menu. Resend the format, graphic, and check
digit packets. If the error reappears, call Technical
Support.
427
Format name is invalid. Valid name is 1 - 8 characters
inside quotes or "" for a printer-assigned name. Press
the FEED button and try to continue. If the error
reappears, call Technical Support.
428
Batch name is invalid or graphic not found. Press the
FEED button and try to continue. If the error
reappears, call Technical Support.
429
A field number appears more than once in a format.
430
The format uses a graphic file that cannot be found.
433
The batch references a field number that does not exist
in the format.
497
An error occurred during the loop back test on the
parallel port. Call Service.
Errors 9-11