Paxar Monarch 9413 User Manual
Page 126
269
Stop bits selection must be 0 (1 bit), or 1 (2 bits).
Resend the communication settings packet or check the
DIP switch settings.
270
Parity selection must be 0 (none), 1 (odd), or 2 (even).
Resend the communication settings packet or check the
DIP switch settings.
271
Flow control selection must be 0 (none), 1 (DTR), 2
(CTS/RTS), or 3 (XON/XOFF). Resend the
communication settings packet or check the DIP switch
settings.
272
Internal code page selection must be 0 (Internal), 1
(ANSI), 2 (DOS 437), or 3 (DOS 850).
273
Cut adjustment must be -300 to 300 dots.
282
RS232 Trailer string is too long. Use a maximum of 3
characters.
283
ENQ Trailer string is too long. Use a maximum of 3
characters.
284
The buffer type must be T (Transmit), R (Receive), I
(Image), F (Format), or D (Downloadable Fonts).
285
The storage device type in the memory configuration
packet must be N (non-volatile RAM).
286
The buffer size is invalid.
287
The printhead width must be 0.
288
The battery voltage must be 0 (15-volt battery) or 1
(12-volt battery).
289
The printer address specified in the communication
settings packet must use exactly six characters.
9-8 Errors