Paxar Monarch 9413 - Manual (Page 150)

M o n o s p a c e d F o n t M a g n i f i c a t i o n
Monospaced characters occupy the same amount of space within
a magnification. Use monospaced fonts for price fields and data
you want to list in a column. Decide how wide and tall you want
the characters to appear on the labels. The following two tables
show the width and height of each of the monospaced fonts after
magnification.
This table includes the default (3 dots for Standard, 1 dot for
Reduced, 3 dots for Bold) spacing.
Width Mag. Standard Reduced Bold
Units Character
Width
Sample
Character
Width
Sample
Character
Width
Sample
1x 1/100 in. 8.37 3.9 13.3
1/10 mm 21.26 9.9 33.78
Dots 17 ! 8 ( 27
/
7x 1/100 in. 49.75 24.63 84.24
1/10 mm 126.37 62.56 214
Dots 101 ' 50 . 171
5
Only the 1x width can be scanned with the OCRA-like font.
Using a printhead with 203 dpi, the character widths are as
follows: 7.9 (English), 20.1 (Metric), and 16 (Dots).
To calculate other font widths, multiply the font dots (14 dots for
Standard, 7 dots for Reduced, 24 dots for Bold) by the
magnification and add the default spacing (3 dots for Standard, 1
dot for Reduced, 3 dots for Bold) between characters.
Example
14 (Standard font dots) x 5 (magnification) = 70 + 3 (default
spacing between characters). There are 73 dots in the Standard
font at 5x.
B-4 Fonts