Paxar Monarch 9413 - Manual (Page 63)

C4. gap Number of dots between characters. Range: 0-99.
Any number other than 0 or the default number affects your
field width. Default spacing:
Standard 3 dots
Reduced 1 dot
Bold 3 dots
OCRA-like 3 dots
CG Triumvirate Bold varies with each letter
CG Triumvirate varies with each letter
C5. font Style of font. Options:
1
Standard 10 CG Triumvirate Bold
2 Reduced 11 CG Triumvirate
3 Bold
4 OCRA-like
or a valid downloaded font selector number.
C6. hgt mag Height magnifier, 1-7 (times). Use a magnifier of 1 with
proportionally spaced fonts, because characters lose
smoothness at higher magnifications.
C7. wid mag Width magnifier, 1-7 (times) Proportionally spaced fonts do
not have a set width. To estimate the size of your field, use
the letter "W" for the widest field or an "L" for an average
width field.
C8. color Options for standard printer fonts:
B
Opaque, Normal, Black, Normal
D Opaque, Normal, White, Normal
O Transparent, Normal, Black, Normal
R Opaque, Normal, White, Normal
W Opaque, Normal, White, Normal
There are two types of field color overlay attributes:
Transparent The overlay field (text or constant text) does
not block out (or "erase") existing fields.
Opaque The overlay field blocks out (or "erases")
existing fields.
Field placement in the packet is an important consideration
when using field color attributes, because fields are imaged in
the order they are received. If a line field is defined before
the overlay (text or constant text) field, the line field is
blocked out by the overlay field, depending on the overlay
field’s color attribute. If a line field is defined after the overlay
field, the line field is not blocked out by the overlay field,
regardless of the overlay field’s color attribute.
Defining Fields 4-15