Philips DTR7510/05 - Manual (Page 38)

Use more of your Digital Terrestrial Receiver 38
Software information
This menu gives you information on the Digital
Terrestrial Receiver, including the model type
and current software version.
Software upgrade
Software upgrade is used to display the current
software version.
In order to maintain advantages of software
improvements we are carrying out, please check
regularly on the DTG web site, (http://www.dtg.
org.uk/industry/download_schedule.php) in the
“Freeview downloads” tables, for the availability
of a new software version for the Philips
DTR7510/05 digital terrestrial recorder.
If there is a new software version broadcast,
please follow the instructions:
Press red colored button to check if an
update is available. It will take few minutes.
If a new version is found, press OK to install
it. Press OK to confirm.
When update is finished, it will reboot the box.
Factory reset
Factory Reset is used to restart the Digital
Terrestrial Receiver in its initial state: it is
protected by code (default 0000)
Reset & restart: you lose all data and information
previously stored, and you have to restart first
installation.
All recordings on hard drive are deleted !!
Conditional access
The Conditional access sub-menu is used
to give information on the Nagra-Mediagard
conditionnal access embedded in the software
version of your digital terrestrail recorder.
5.9.4 Smart Card
Once you are in the Settings menu, select
Smart Card using the / arrow keys.
Press OK.
This menu provides you access to the following
options:
• System info
• Operator
• Maturity
• PIN code
System info: displays card system info
Operator: displays card operators info
Maturity: provides information about maturity
level
PIN code: use it to change the card PIN code
DTR 7510 200910.indd 38 16/10/2009 17:41:07