Philips DTR7510/05 - Manual (Page 35)

35 Use more of your Digital Terrestrial Receiver
EN
G
LI
SH
• Lip synchronisation: Set to on by default.
Other choices are progressive and off
• Small video size: size of the inset window
in PiP mode, choose between small,
standard and large
• Small video position: select the corner in
which the inset windwo in PiP mode shall
be displayed
Note
The TV shape is managed by the Digital
Terrestrial Receiver. But TV set manage dalso the
adaptation of input format to shape and siae. Set
your TV to the similar equivalent setting (refer
to the user manual of your TV set).
Recorder settings
• Live TV playback: set the maximum
duration of live TV playback, from 30
minutes to 3 hours, or disable it
• Instant replay: set the time of instant replay,
from 10 seconds to 1 minute
• Chapter size: set the Time shift buffer’s
default storage size from 1 minute to 15
minutes
• Recording duration: Set the recording
default duration, from 30 minute to 3
hours.
System settings
• TV scart output
• RGB level
• AUX scart
• SPDIF & HDMI audio: Set the value to
PCM for stereo and Dolby Digital for
multi-surround sound output on audio
amplifier
• Antenna powering
HDMI settings
• Output resolution: only two choices are
possible to set HDMI output resolution:
“automatic” mode (by default) or “576i”
mode.
• Mode: select HDMI if your TV set is fitted
with an HDMI input or select DVI if your
TV set is only fitted with a DVI input. In the
latter case, you need an HDMI-DVI cable
or a HDMI-DVI adapter.
DTR 7510 200910.indd 35 16/10/2009 17:41:05