Philips DTR7510/05 - Manual (Page 37)

37 Use more of your Digital Terrestrial Receiver
EN
G
LI
SH
PIN Code
To change your PIN Code:
Enter your PIN Code.
Enter your new PIN Code.
Enter your new PIN Code again.
Note
Once you have changed your PIN Code, keep
it secret to prevent others from using it. If you
forget or lose your PIN Code, refer to chapter
Frequently asked questions.
Note
The PIN Code default value is 0000.
5.9.3 Installation
Once you are in the Settings menu, select
Installation using the / arrow keys.
Press OK.
This menu is used to:
• Manage channel installation
• Position your antenna - Test signal level and
quality
• Manage the Hard Disk Drive
• Check software upgrades and information
• Restore the Digital Terrestrial Receiver
factory settings.
Disabling Hard drive is a way to reduce Fan
noise. HDD is a source of heat and not using it
reduces the need for using the internal fan.
Channel installation
This sub-menu is used to manage channel
installation and update TV/Radio services in the
main list
• Update installation: manual update
• Full installation: choose between fast,
(recommanded) automatic and
advanced. (long) see Retune page 11
• Erase channel lists: Use this option to
delete all channels and favorite lists.
Antenna setting
This sub-menu is used to check the signal level
and quality. If the signal power and quality is not
adequate, adjust your antenna.
Note
For information on the UHF channels available in
your area refer to your local dealer.
Hard disk drive
• Record files: press OK to delete all
• Format disk: press OK to format disk
• Hard disk drive: use the / arrow
keys to enable or disable Hard Disk Drive.
Note
• Disabling the Hard Disk Drive also disables
all the recording functions and Time Shift
Buffer functions. You won’t be able to
access the recorded programmes.
• Information on the HDD reference and
capacity is displayed in the bottom right
corner.
DTR 7510 200910.indd 37 16/10/2009 17:41:06