Philips DTR7510/05 - Manual (Page 13)

13 Using your Digital Terrestrial Receiver
EN
G
LI
SH
Channel lists
While watching digital TV, you can access existing
channel lists. See creation of a channel list in
chapter channel manager..
Press FAV to display the channels of the
current list.
Press the arrow key to go to the
Channel lists menu.
Scroll up or down to the desired channel list
using the / arrow keys.
Press OK or arrow key to display the
channels of the selected list.
Scroll up or down to the desired channel
using the / arrow keys.
Press OK to select the channel, or EXIT.
Press OK again or FAV or EXIT to close
the channel list.
4 Using your Digital
Terrestrial Receiver
4.1 Watching live TV
Digital Terrestrial Receiver wake-up
To wake up your Digital Terrestrial Receiver
from standby, press: STANDBY on the front
panel or remote control
Note
In order to reduce power consumption, switch
your Digital Terrestrial Receiver to standby
mode whenever you are not using it.
For maximum energy saving we recommend
you to switch off the Digital Terrestrial Receiver
using the switch at the back of the Digital
Terrestrial Receiver if you are not using it for a
long time.
Channel selection
To change channels, use P+/P- or the numerical
keys of the remote control or on the front
panel.
Press BACK to move to the previous channel
you watched.
A quicker way is to use FAV to use a Channel
lists. OK will present the channel, OK again
hides the Channel list. You could create your
own channel list, see §5.6 Channel manager.
Another quick way to select a channel is using
the channel banner, see on next page.
Note
When two records are ongoing at the same
time on two different frequencies, zapping is only
allowed on those two frequencies. Unavailable
channels are in grey in the Favorite list menu.
Recording from the time shift buffer will
record the full programme even if you start
the recording after the programme has already
begun. At the end of this operation, the playback
will start again automatically at the point
where you started the recording. The recorded
programme will be indicated in red in the Time
Shift bar (Refer to page 19).
DTR 7510 200910.indd 13 16/10/2009 17:40:52