Philips DTR7510/05 - Manual (Page 12)

Getting started 12
Use the / arrow keys to highlight
Installation.
Press OK.
Use the / arrow keys to highlight
Full installation.
Press OK.
On screen Scan mode selection, select
Scan type fast.
Note
If the number of TV/Radio stays at 0 value,
refer to chapter 10 Frequently asked questions.
You could try again from this step, choosing
Scan type automatic, or advanced but it
could take more than 30 minutes.
If the problem remains, contact your dealer.
Screen Scan mode selection:
Press OK.
The scan process displays channels found with
signal level and quality. of all sources analysed
Note
If signal level stays low and red, during the full
scan operation, check the cables.
If Power seems ok but Quality indicator stays
low and red, check the availability of digital
signals in your area. If you are supposed to
have access to digital signal, check your aerial
installation.
If some local variant exist, these extra channels
will start with number 800.
When the scan is finished, your Digital
Terrestrial Receiver display again the screen
of scan mode selection. Press Exit
Enjoy your Digital Terrestrial Receiver.
DTR 7510 200910.indd 12 16/10/2009 17:40:51