beautypg.com

Philips DTR7510/05 User Manual

Page 19

background image

19

Using your Digital Terrestrial Receiver

EN

G

LI

SH

Recording a TV programme that you have

been watching

While you watch live TV, press OK.

The time shift bar appears.

Press the the

arrow key. to find the

chapter where you want to start to record..

Press

to start the record.

Recording a TV programme through the

Time Shift Bar

While you watch live TV, press OK.

The time shift bar appears.

Press the yellow-coloured key to display the

previous programmes.

Move to the desired programme by using

the / arrow keys.

Press OK to select the programme.

Press

. to start the record.

Note

Recording from the time shift buffer will record

the full programme from beginning to the end,

even if you start the recording after the

programme has already begun. As this is a

relatively complex operation, the box does not

display the image while the buffer is transferring

the start of the programme (to the hard disk).

At the end of this operation, the playback will

start again automatically at the point where you

started the recording. The recorded programme

will be indicated in red in the Time Shift bar.

Recording by setting a timer through the

TV guide

Press on the remote control to go to the

TV Guide.

Scroll to the programme you want to

record.

Press

on the remote control.

Press EXIT several times to close the

menus.

Recording with a series link

Press on the remote control to go to the

TV Guide.

Press again to go to the 8 days TV Guide.

Use the / / / arrow keys to scroll

to the programme you want to record.

Press the red-coloured key.

If the programme is in a series, the Digital

Terrestrial Receiver displays the following

screen:

Select the action to perform:

• Press the red-coloured key to record the

current episode only.

• Press the green-coloured key to record the

whole series (see notes about limitations

and conflicts).

Once you have pressed one of those two

keys, the record is set.

Note: all record programming are called

Timers recording. By pressing Timer button

you could access to the list, check and correct

decisions taken to resolve conflicts.

DTR 7510 200910.indd 19

16/10/2009 17:40:56

This manual is related to the following products: