Paradyne IP DSLAM GranDSLAM 4200 - Manual (Page 41)

2. Cabling
4200-A2-GN20-40 January 2004 2-17
3. Insert the plug into either the A or B power input terminal on the front panel of
the GranDSLAM 4200.
4. If the unit is in a rack, dress the power cables to the left and fasten them to the
rail with a cable tie.
5. Power on the GranDSLAM 4200.
6. Make sure the STATUS LED on the front panel is ON (green). See Chapter 3,
LEDs .
Insert the . . . Into the . . .
Negative side of the power source –48VDC input terminal.
Positive side of the power source RTN (return) terminal.
02-17282
POWER
A
ALARM
RTN -48V
DC
BITS
MGMT
CONSOLE
S TA
T U S
U P L IN K
A LR
M
TE
S T
B
A
3.5 A 60
B
E1 MODULE
4202 TX
RX
120Ω
75 Ω