Dsl ports – Paradyne IP DSLAM GranDSLAM 4200 User Manual
Page 26
2. Cabling
2-2
January 2004
4200-A2-GN20-40
DSL Ports
The GranDSLAM 4200 DSL connector supports the tip and ring connections of up
to 24 DSL ports over a 50-position cable. A POTS (plain old telephone service)
splitter connector is also provided. If your model does not contain an integrated
POTS splitter, you must connect the unit to a separate POTS splitter.
Procedure
To cable the DSL Ports:
1. Insert a cable tie (provided) through the top of the anchor mount next to the
DSL PORTS 1–24 connector.
2. If the connector for your cable has a short captive screw, attach the cable to
the DSL PORTS 1–24 connector and fasten it to the jack screw with its short
captive screw.
3. If the connector for your cable has a long captive screw, remove the provided
jack screw from the threaded hole next to the DSL PORTS 1–24 connector.
Attach the DSL PORTS 1–24 connector to the unit using the long, captive
pan-head screw (provided).
4. Tighten the cable tie around the connector and trim the excess.
5. If using an integrated POTS splitter, the POTS 1–24 connector is used.
Repeat
through
, substituting POTS 1–24 for DSL PORTS 1–24.
6. Secure the cables as required for strain relief.
Short
Screw
#4-40
Jack Screw
02-17083
Anchor
Mount
50-Pin
Connector
02-17346
Anchor
Mount
50-Pin
Connector
Long
Screw
02-17084