Paradyne IP DSLAM GranDSLAM 4200 - Manual (Page 18)

1. Installation
1-8 January 2004 4200-A2-GN20-40
Installing the GranDSLAM 4200 Into a Rack
Two types of mounting screws are provided. Use:
„ #10-32 mounting screws for rails with threaded screw holes
„ #12-24 mounting screws and self-retaining nuts for rails with unthreaded
screw holes
NOTE:
Before installing the GranDSLAM 4200 in a rack or cabinet, you may prefer to
first attach the unit to a ground while you have unrestricted access to the
grounding lug on the side of the unit. See
Grounding Lug in Chapter 2, Cabling
for more information.
Procedure
To install the GranDSLAM 4200 into a rack:
1. Determine where in the rack you will mount the GranDSLAM 4200. If your rack
does not have threaded screw holes, slip self-retaining nuts onto the rails
where the GranDSLAM 4200 will be fastened.
2. Place the unit so that the brackets rest against the front of the rails. Insert
screws in the bottom screw positions and hand-tighten them.
02-17070